nginx+tomcat实现负载均衡，使用redis session共享
(编辑：jimmy 日期: 2024/11/15 浏览：3 次 )
环境准备
1、准备一台nginx服务器 ip192.168.1.133 端口81
安装过程：
＃首先安装依赖： yum -y install gcc-c++ yum -y install pcre pcre-devel yum -y install zlib zlib-devel yum -y install openssl openssl—devel #注意 ： 安装nginx必须使用 root 用户安装 #创建一个nginx目录 mkdir /usr/local/src/nginx #进入到nginx目录 cd /usr/local/src/nginx #下载或上传安装包 wget http://nginx.org/download/nginx.tar.gz 或 rz上传 #解压安装包 tar -xvf nginx.tar.gz #进入到解压后的目录 cd nginx # 下面 才开始正式安装 #把nginx安装到指定用户的目录 mkdir -p /ucenter/soft/nginx #安装配置 prefix为安装目录 user为用户 group为 组 ./configure --prefix=/ucenter/soft/nginx --user=ucenter --group=ucenter #编译 make #安装 make install #在linux系统中由于非root用户不能占用80端口，所以需要使普通用户以root身份启动nginx。 cd /ucenter/soft/nginx/sbin #把soft文件下所有的文件所属者修改为ucener -R 表示递归 chown ucenter:ucenter ./soft/ -R #修改 ./nginx 的所属为root chown root nginx #让普通用户可以使用80端口，可以使用root权限启用nginx chmod u+s nginx #修改配置文件 在修改配置文件之前 ，要备份该文件 cd conf/ # 要注意nginx 的工作进程，一般根据cpu的核数去修改 vim nginx.conf #关闭防火墙，打开80端口 service iptables stop #启动nginx ./nginx #重启nginx ./nginx -s reload #关闭nginx ./nginx -s stop
准备一台tomcat服务器，先准备java环境，安装jdk步骤省略
然后分别安装3个tomcat 服务器ip地址：192.168.1.143，tomcat1 8080端口，tomcat2 8081端口，tomcat3 8082端口。
apache-tomcat-7.0.64/conf/server.xml配置文件修改这三个地方，这样端口就不会冲突
<Server port="8005" shutdown="SHUTDOWN"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
修改tomcat ROOT目录下index.jsp，分别增加每个tomcat的标识，以及在页面上显示session ID
<%--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
--%>
<!DOCTYPE html>
<%@ page session="true" %>
<%
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("yyyy");
request.setAttribute("year", sdf.format(new java.util.Date()));
request.setAttribute("tomcatUrl", "http://tomcat.apache.org/");
request.setAttribute("tomcatDocUrl", "/docs/");
request.setAttribute("tomcatExamplesUrl", "/examples/");
%>
<html lang="en">
<head>
<title><%=request.getServletContext().getServerInfo() %></title>
<link href="favicon.ico" rel="icon" type="image/x-icon" />
<link href="favicon.ico" rel="shortcut icon" type="image/x-icon" />
<link href="tomcat.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
<div id="navigation" class="curved container">
<span id="nav-home"><a href="${tomcatUrl}">Home--<%=request.getSession().getId() %></a></span>
<span id="nav-hosts"><a href="${tomcatDocUrl}">Documentation</a></span>
<span id="nav-config"><a href="${tomcatDocUrl}config/">Configuration</a></span>
<span id="nav-examples"><a href="${tomcatExamplesUrl}">Examples</a></span>
<span id="nav-wiki"><a href="http://wiki.apache.org/tomcat/FrontPage">Wiki</a></span>
<span id="nav-lists"><a href="${tomcatUrl}lists.html">Mailing Lists</a></span>
<span id="nav-help"><a href="${tomcatUrl}findhelp.html">Find Help</a></span>
<br class="separator" />
</div>
<div id="asf-box">
<h1>${pageContext.servletContext.serverInfo}--8080</h1>
</div>
<div id="upper" class="curved container">
<div id="congrats" class="curved container">
<h2>If you're seeing this, you've successfully installed Tomcat. Congratulations!</h2>
</div>
<div id="notice">
<img src="/UploadFiles/2021-04-10/tomcat.png">
这时候 修改nginx配置文件nginx.conf，把三台tomcat的ip地址以及端口号加入进去，使用nginx做代理
#user nobody;
worker_processes 1;
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#pid logs/nginx.pid;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
#access_log logs/access.log main;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
upstream localhost1 {
#ip_hash;
server 192.168.1.143:8080;
server 192.168.1.143:8081;
server 192.168.1.143:8082;
}
server {
listen 81;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
proxy_connect_timeout 3;
proxy_send_timeout 30;
proxy_read_timeout 30;
proxy_pass http://localhost1;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
# another virtual host using mix of IP-, name-, and port-based configuration
#
#server {
# listen 8000;
# listen somename:8080;
# server_name somename alias another.alias;
# location / {
# root html;
# index index.html index.htm;
# }
#}
# HTTPS server
#
#server {
# listen 443;
# server_name localhost;
# ssl on;
# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;
# ssl_session_timeout 5m;
# ssl_protocols SSLv2 SSLv3 TLSv1;
# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;
# location / {
# root html;
# index index.html index.htm;
# }
#}
}
这时候，分别启动三台tomcat以及nginx，访问http://192.168.1.133:81，这时候每次刷新页面，都会随机访问8080或者8081或者8082，而且页面上出现的session id也都是不一样的，我们应该如何让这三台tomcat共享session呢，我们使用redis来做。
这时候，在已经按照三台tomcat的服务器192.168.1.143上，安装redis，安装步骤如下：
$ wget http://download.redis.io/releases/redis-3.2.3.tar.gz
$ tar xzf redis-3.2.3.tar.gz
$ cd redis-3.2.3
$ make MALLOC=libc
#启动redis src前面是安装的路径
$ src/redis-server &
#关闭redis
src/redis-cli shutdown
#使用redis 放入键值对 key value
$ src/redis-cli
127.0.0.1:6379> set foo bar
OK
127.0.0.1:6379> get foo
"bar"
$
安装完redis之后，在三个tomcat的lib文件夹内分别上传这五个所依赖的jar，分别是
commons-pool2-2.0.jar
jedis-2.5.2.jar
tomcat-redis-session-manager1.2.jar
tomcat-juli.jar
tomcat-juli-adapters.jar
所有jar在这里了，下载地址
然后分别修个三个tomcat的context.xml文件，增加如下的配置
<"com.orangefunction.tomcat.redissessions.RedisSessionHandlerValve" />
<Manager className="com.orangefunction.tomcat.redissessions.RedisSessionManager"
host="127.0.0.1"
port="6379"
database="0"
maxInactiveInterval="60" />
</Context>
这时候，分别重启三个tomcat以及nginx，查看tomcat日志之后，发现没有任何异常报错，说明我们成功了，接下来开始测试。
我们访问nginx服务器地址：http://192.168.1.133:81/
得到的是8080端口的 tomcat1 ，session id为1A0625767F27BA95EF4D5F061FE0568D
这时候按F5刷新页面，得到的是8081端口的 tomcat2 ，session id依旧是 1A0625767F27BA95EF4D5F061FE0568D
再次刷新页面，得到的是8082端口的 tomcat3，session id依旧是 1A0625767F27BA95EF4D5F061FE0568D。 、
这时候，说明我们搭建tomcat + nginx负载均衡 + redis session同步成功啦！
nginx帮助把我们的请求均匀的分发给三个tomcat --》tomcat1 、tomcat2以及tomcat3
redis帮助我们同步session，这样一来，我们的服务器性能就会提高许多，任何一台tomcat发生故障后，对整体的服务都不会有影响了。
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持。
下一篇：详解Ngigx+Tomcat配置动静分离，负载均衡